Home » Review » Solder Wire Breaking Soldering Station

Lead Free Self-Feeder&Solder Wire Breaking Soldering Station

This product has been discontinued and removed from our shelves.
Lead Free Self-Feeder&Solder Wire Breaking Soldering StationQUICK376DI
Lead Free Self-Feeder&Solder Wire Breaking Soldering StationQUICK376I

1. High frequency current heating, temperature controlled by K-type sensor, rapid temperature rising and thermal recovery.
2. Automatic soldering wire breaking, ESD safe design
3. Micro computer control, temperature adjusted by buttons, digital temperature calibration, auto sleeping function.
4. Auto and manual feeding modes available. Feeding times can be set.
5. Feeding speed, length and interval time can be adjusted, with adjustable backing function.
6. Pedal switch and hand switch available.
7. Can be used as a lead free soldering station only.
8. Can prevent soldering wire from spattering during soldering process.


Power consumption 90W
Voltage AC 220V
Temperature range 200℃ - 480℃
Temperature stability ±2℃ (stationary air, no load)
Tip to ground resistance < 2Ω
Tip to ground potential < 2mV
Motor Step motor
Feeding speed about 2.7mm/s-27mm/s(36°/s-360°/s)
Feeding length 0-150mm
Feeding interval time 0-2.7s
Backing time 0-0.9s (about 0-25mm; constant speed: 360°/s)
Feeding mode Auto (1-9)/Manual (0)
Diameter of soldering wire 0.3, 0.4, 0.5, 0.6, 0.8, 1.0, 1.2, 1.4, 1.6(mm)
Weight about 3.3kg

Replaceable tips